Dimensional Print Studio

Ramblin' Dan's

The HandNot every three dimensional printed item has to be all plastic. A frighting idea! This project is called the Cancan.

The metal can in the picture was used just by itself for storing the variety of desk items shown. After looking at it (the side ribs are interesting) and using it for a few years, the idea came...  it needs to be a 3D printed item. The inspiration was to incorporate the metal can into the printed design. The idea was to "get out of the box" from thinking only in plastic. 

The can was measured and the design drawn in Fusion360. F-360 is not good for adding text on a cylinder so that was done with MS 3D Builder. The color is a bit ugly, a pinkish "flesh" color. I wanted to use it up, and this was a good project to do that. I saved some material by not making the bottom solid. Cutouts in the sides could have been an interesting feature too, showing the ribs on the can. 

Version two has been drawn and has some large raised "rivit heads" embossed around near the top to help grip the cancan, It's not likely to get printed as I don't realy need, or have space for, version two.

This is a "show and tell" about trying new ways to usee 3D printing.

DSC09205 DSC09206
DSC09207 DSC09208
DSC09209  cancan v2

Copyright © TEDatum Publishing . All Rights Reserved.